Carbatec CT-25650, Инструкция по эксплуатации и список запасных частей

Страница: 7 / 18

7
MOUNTING WOOD LATHE ON STAND
1. Have others nearby and ready to lend a hand, as help will be required for lifting the
lathe, and for lining up and securing the bed to the stand.
2. Align the three holes in each end of the tool tray with the corresponding holes in the
right and left stands.(Fig.1)
3.
Secure the tool tray to the right and left stands using, at each end, three 5/16” bolts,
washers and nuts.
4. Lift and set the lathe onto the stand and line up the holes at each end in the bed,
with the holes on the top of the stand.(Fig.2)
5. Secure
the bed to the stand by using the four 3/8” bolts (2 at each end) from the
bed and through the corresponding holes in the stand.(Fig.3) Tighten the bolts
down by using the four nuts.(Fig.1)
Three Holes
Fig.1
Fig.2
Fig.3
Tighten the bolts down by
using the four nuts.