Carbatec CT-25650, Инструкция по эксплуатации и список запасных частей

Страница: 12 / 18

12
Speed Chart
Spindle
Speed Readout
Spindle
Speed
Regulation
Knob
CHANGING SPINDLE SPEED
The spindle speed is controlled by a frequency inverter which provides variable speed
change. The spindle provides 3 ranges of speed
—high, medium and low. The range
of speed is shown on the speed chart attached to the headstock.
Change the spindle speed as follows:
1. Check the present spindle speed range.
2. Start the spindle running.
3. Turn the speed regulation knob to change speed. Turn it clockwisely (
direction) for increasing speed and counter-clockwisely (toward - direction) for
decreasing speed.
4. Change spindle speed only when the spindle is running.
5. The spindle speed is displayed on the spindle speed readout.