CARBATEC.C OM.AU
BDS-1530P
23.
SECURE ALL WORK.
Use clamps or jigs
to secure the work piece. This is safer
than attempting to hold the work piece
with your hands.
24.
STAY ALERT, WATCH WHAT YOU ARE
DOING, AND USE COMMON SENSE
WHEN OPERATING A POWER TOOL
. A
moment of inattention while operating
power tools may result in serious
personal injury.
25.
ALWAYS WEAR A DUST MASK TO
PREVENT INHALING DANGEROUS
DUST OR AIRBORNE PARTICLES,
including wood dust, crystalline silica
dust and asbestos dust. Direct particles
away from face and body. Always
operate tool in well ventilated area
and provide for proper dust removal.
Use dust collection system wherever
possible. Exposure to dust may cause
serious and permanent respiratory or
other injury, including silicosis (a serious
lung disease), cancer, and death. Avoid
breathing dust, and avoid prolonged
contact with dust. Allowing dust to get
into your mouth or eyes, or lay on your
skin may promote absorption of harmful
material. Always use properly fitting AS/
NZS approved respiratory protection
appropriate for the dust exposure, and
wash exposed areas with soap and
water.
26.
USE A PROPER EXTENSION CORD IN
GOOD CONDITION.
Use of extension
cords should be avoided where possible.
When using an extension cord, be sure
to have a cord heavy enough to carry
the current your product will draw, and
with compatible pin configuration and
connections (NEVER use an extension
cord rated at less than your machine).
Longer run extensions will need heavier
duty extension cords. Only connect
your extension cord or machine to
a receptacle that accepts your plug
and never modify your plug to suit a
receptacle.
SAFETY INSTRUCTIONS
9
