Version 24.02.2012
C2-RNSE
Pa
ge
6
3.2.
Connections to head-unit
Remove the head-unit from the dash-board.
Transfer female Quadlock connector from the back of the head-unit to male
Quadlock connector of harness C3C-RNSE.
Plug female Quadlock connector of C3C-RNSE into male Quadlock socket of
head-unit.
Plug female 32pin AMP-connector of C3C-RNSE into male 32pin AMP-socket of head-
unit.
Note:
If the 32pin AMP-socket of the head-unit is already occupied, the vehicle probably has
a factory rear-view camera or a factory TV-tuner. In case of a factory tuner, it must be
uninstalled: disconnect the female 32pin AMP-connector of the factory harness and
disconnect all wires from the factory TV-tuner. In case of a factory rear-view camera you
have ordered/received the wrong product, call for support.
3.3.
Connecting peripheral devices
It is possible to connect up to 2 after-market AV-sources, an after-market rear-view camera
and rear-seat-entertainment to the c.LOGiC Interface.
Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC
functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral
devices as soon as possible.
