Version 24.02.2012
C2-RNSE
Pa
ge
5
3.
Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Place of installation is behind the head-unit.
3.1.
Interconnecting Interface-box, CAN-box and harness
Plug harness C3C-RNSE into 8pin Molex of CAN-box TV-400..
Plug harness C3C-RNSE into 14pin Molex of Interface-box C2C-M200.
Plug female 18pin AMP-connector of C3C-RNSE into male 18pin AMP-socket of
Interface-box C2C-M200.
