Version 24.02.2012
C2-RNSE
Pa
ge
3
dip switches
interface-box
1.2.
Check compatibility of vehicle and accessories
1.3.
Setting the dip switches of the CAN-box TV-400
1.4.
Setting the dip switches of the Interface-box C2C-M200
The default dip switch settings of the Interface-box
need to be changed ONLY if an after-market
rear-view camera shall be connected or if the AV2
of the c.LOGiC shall be deactivated. The dip
switches are located
inside
the Interface-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = OFF
Note:
Instead of dip switches, there might be jumper 1 to 3.
1.4.1.
Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected, in order
for the c.LOGiC to automatically switch to its camera input
on engaged reverse gear,
set dip2 = ON (up).
Note:
With after-market cameras, automatic switching works only from c.LOGiC mode. For
automatic switching from OEM modes, it is necessary to code the head-unit to rear-view
camera per diagnosis computer.
Requirements
Vehicle
Audi, Lamborghini
Navigation
Audi Navi Plus RNS-E all-in-one navigation 16:9
Limitations
Factory-TV-tuner
Must NOT be installed.
After-market rear-view
Only compatible with NTSC-cameras.
camera
Automatic switching to camera from OEM mode only works
after coding the head-unit to rear-view camera per diagnosis
computer (Only possible on RNS-E with minimum software 550
and till year 2010).
Video-in-motion function
Navigation does NOT work while VIM is activated.
All vehicles
dip 1 OFF, dip 2 OFF, dip 3 OFF
