Installation
Verify scope of delivery
Before starting the installation, make sure that all the individual parts listed in the scope of delivery
are present�
Product installation
WARNING
The device should be installed at a height of about 30 cm above the floor� Since
different gases can distribute themselves differently in the room due to their
density, up to two additional sensors should be installed at different heights or
positions for better detection�
•
The mounting location should be as level as possible�
•
Check beforehand that there is sufficient space available at the desired
installation location to attach the screws and that no wires in the vehicle
are damaged during installation�
•
Make sure that the connection cable can be routed to the device�
1
Remove the
mounting plate
of the device�
Caratec
ELECTRONICS
32|33
