Carat BS-1253, Инструкция по эксплуатации

Страница: 9 / 36

9
NMHX018
03-01-2017 ENGLISH – ORIGINAL INSTRUCTIONS
• To achieve a high degree of dust extraction, use a dust
category M vacuum cleaner for mineral dust together
with this power tool.
• Provide good ventilation of the working place.
• It is recommended to wear a FFP2 fi lter class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
Please observe the following notes in order to reduce the
dust emissions occurring while working.
• Only use combinations of diamond grinding tools, con-
crete grinders with mounted guard and extraction hood
as well as dust category M vacuum cleaners that are
recommended by Carat. Other combinations can lead to
insuffi cient dust collection and separation.
• Observe the operating instructions of the vacuum clea-
ner for maintenance and cleaning of the vacuum clea-
ner, including the fi lter. Empty dust collection containers
immediately once full. Clean the fi lters of the vacuum
cleaner regularly and always insert the fi lters completely
into the vacuum cleaner.
• Only use vacuum hoses as intended by Carat. Do not
manipulate the vacuum hose. When rocks or chunks of
stone/masonry are drawn into the vacuum hose, cease
work and clean the vacuum hose immediately. Prevent
the vacuum hose from being bent or creased.
• Use the concrete grinder only as intended for.
• Observe the general requirements for construction sites.
• Provide for good ventilation.
• Ensure that the work area is free of obstructions. For lon-
ger grinding jobs, the vacuum cleaner must be able to
move along freely and at the right time.
• Wear hearing protection, protective goggles, a dust
mask and gloves as required. As dust mask, use at least
a particle-fi ltering class FFP 2 half-mask.
• Use a suitable vacuum cleaner for cleaning the work-
place. Prevent settled dust from being swirled up by
sweeping.
ASSEMBLY INSTRUCTIONS
Pull the mains plug of the power tool from the
socket, before any work on the machine itself!
Mounting the diamond grinding tool
This power tool is not intended to be used in combination
with other tools than diamond grinding tools. The guard
doesn’t supply suitable protection for tools other than dia-
mond grinding tools.
The arbor of the diamond grinding tool must fi t the moun-
ting fl ange. Do not increase the arbor of the diamond grin-
ding tool. Do not use reducers or adapters.
The permissible speed (rpm) of the diamond grinding tools
used must be at least the 10.000 per minute.
Always select a type diamond grinding tool suitable for the
specifi c material to be grinded. We advise diamond grin-
ding tools from Carat. Observe the manual of the grinding
tools.
Due to continuous product development and technical
improvements, technical information may be changed
without prior notice.
PERSONAL SAFETY
Read all operating and safety instructions
before using the machine. Follow the instructi-
ons strictly for your own safety.
MACHINE DATA
Type BS-1253
Rated power input 1500W
Protection class 2 / II
No-load speed 2300-9000 min -1
Thread of spindle M14
Arbor diameter Ø 22,2 mm (7/8”)
Diamond grinding tool diameter Ø 125 mm
Weight 3,1 kg
MAIN PARTS
The main parts are numbered identical to the graphic of
the power tool at page 3 of this manual.
1. Guard and extraction hood
2. Forebody of guard and extraction hood
3. Brush collar
4. Vacuum hose
5. Vacuum connection
6. Auxiliary handle
7. Spindle lock button
8. ON/OFF-switch
9. Grinder Spindle
10. Mounting fl ange
11. Spacer
12. Diamond grinding tool
13. Clamping nut
14. Dial rotational speed
15. Two-pin spanner for clamping nut
INTENDED USE
The machine is intended for dry grinding, deburring and
smoothing mainly mineral materials (such as e.g., con-
crete, stone, marble and pavement/plaster fl ooring). It is
also suitable for removing protective coating and adhesive
residue. The machine should be used exclusively in con-
junction with a dust category M vacuum cleaner, suitable
for extracting dust and gravel.
The rotational speed of this machine is adjustable. Depen-
ding on the mounted diamond grinding tool and the mate-
rial to be grinded, it may be desirable to reduce the rota-
tional speed.
POWER SUPPLY
The tool should be connected only to a power supply of the
same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. The tool is double-
insulated in accordance with European Standard and can,
therefore be used from non-grounded sockets.
DUST EXTRACTION
Dust released when processing (grinding of
minerals) can be harmful to one’s health. Tou-
ching or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infecti-
ons of the user or bystanders.