Version 26.11.2020
HW: CAM(V100)/UP(V20)
RL4-PCM50
P
a
g
e
6
1.4.
Settings - 8 Dip switches (black)
Some settings have to be selected by the dip-switches on the
video interface. Dip position down is ON and position up is OFF.
In case of a non-optimal displayed picture with the mentioned dip settings of dips 7 and 8,
we recommend to try each other possible dip switch combination.
After each Dip-switch-change a power-reset of the Video interface has to be performed!
*The front camera will automatically be switched for 5, 10 or 15 seconds after disengaging
the reverse gear (according to the menu adjustments).
See the following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
Front camera
enabled*
disabled
Power supply
output
(red wire)
+12V (max. 3A) when reverse gear is
engaged incl. delay (5,10 or 15
seconds and +12V by manual
switching to front camera by keypad
+12V ACC out
2
CVBS Video 1-input
enabled
disabled
3
CVBS Video 2-input
enabled
disabled
4
Guide-lines
enabled
disabled
5
Rear-view cam
type
after-market
factory or none
6
Factory PDC
Camera only
PDC
7
Monitor
adjustment
PCM 5.0 (Alpine)
PCM 4.1 (Harman)
8
PCM 5.0 (Alpine)
PCM 4.1 (Harman)
