Version 26.11.2020
HW: CAM(V100)/UP(V20)
RL4-PCM50
P
a
g
e
11
2.3.1.2.
Vehicles with PCM 5.0
Disconnect the
grey female HSD connector
(colours may vary) at the rear-side of the head unit and
connect it to the waterblue coloured male HSD connector „
TO LCD“
of the video interface.
Connect the female non-angled waterblue coloured HSD connector of the enclosed picture
signal cable to the waterblue coloured HSD+2 connector
„
HU IN
“
of the video interface.
Connect the opposite female angled purple HSD connector of the enclosed picture signal
cable to the previously become free HSD connector of the head unit
Note:
Depending on the installation conditions, the enclosed picture signal cable may also
be mounted upside down
, concerning it’s HSD connectors
. However,
it‘s
connection must
only be made at the head unit!
