Operation
20
42.CC.2210.2713_BA_V02_EN
5. Disconnect the power supply plug from the three-phase socket. Ensure that the
protective cover snaps back into place and securely closes off the three-phase socket.
6. Pick up the control unit and wind up the cable. Ensure that the AC charging plug and
the power supply plug do not drag along the floor or fall to the floor.
7. Store the AC charging cable in the carrying case.
Charging is complete.
4.5
Troubleshooting
DANGER
Danger of fatal electric shock!
Defective and damaged products can no longer guarantee protection against electrical
voltage!
The electrical voltage in the product is lethal and will cause death by electric shock!
•
Switch off the circuit breakers for all the connected sockets before you disconnect
the product from the power supply!
•
Replace a defective or damaged product immediately!
•
Never attempt to repair or tamper with the product!
The AC charging cable is equipped with safety features that continuously monitor the
charging process. Interruptions in the charging process may be caused by an error that
can be resolved by the user.
The table below provides you with information about the steps you can take to resolve
these errors.
Always finish the charging process before you resolve an error (see the “Finishing
charging” section)!
