P 7061 / BK-706-Flat
•
Make sure that you have removes all the components of packaging, plastic, polystyrene, adhesives, etc.
•
Unroll the feeding cable completely. (The feeding cable must always be unrolled for all its length to avoid
overheating.)
•
During use, above all at the beginning and the end you may hear a click, this is the noise of the expansion
and contraction of the object when it heats, this does not mean bad functioning.
•
Make sure that the switch is on position O (OFF) and insert the plug in a wall socket suitable to receive it.
Avoid the use of adaptors and extensions.
•
To turn on the appliance press the switch, it will light on.
•
The elements, heating themselves will dry towels, clothing, linen, etc.
•
Attention: towels, clothing, linen, etc. must be hung dump and not wet through.
•
When finished using, turn off the appliance and then remove the plug from the wall socket.
IMPORTANT SAFEGUARDS
1)
Extreme caution is necessary when towel warmer is used by or near children or invalids and whenever
the heater is left operating and unattended.
2)
Always unplug heater when not in use.
3)
Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been
dropped or damaged in any manner.
4)
Never place the heater where it may fall into a bathtub or other water container.
5)
Do not run cord under carpeting.
6)
Do not use it in areas where gasoline, paints ,or flammable liquids are use or stored
7)
This heater is not intended for use an extension cord. Plug the cord directly into an appropriate wall
receptable.
8)
Your children should be supervised to ensure that they do not play with the appliance.
SAVE THESE
INSTRUCTIONS.
CAUTION:
- THIS HEATER ONLY OPERATES IN UPRIGHT POSITION.
- STORE THE HEATER IN COOL DRY LOCATION WHEN NOT IN USE.
- DO NOT STORE AWAY UNTIL THE HEATER COOLS DOWN.
1.
The device is intended exclusively for private and not for commercial use. Only use this device as
describe in this instruction manual.
2.
Before to use, make sure that the supply voltage corresponds with the voltage marked on the rating
label.
3.
Do not place any part of this appliance in water or any other liquid.
4.
Do not leave the device unattended when plugged in.
5.
Do not handle the unit or plug with wet hands.
6.
Unplug from the power outlet after use and allow the appliance to cool down completely before to
clean it or to move it.
7.
When disconnecting the cable, always pull at the plug; do not pull on the cable itself.
8.
When using the device, always pull the power cord completely from its housing to prevent
overheating.
9.
If the cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid an electric shock.
10.
Never try to repair it by yourself. It must be repaired by the manufacturer or its service agent or a
similarly qualified person in order to avoid an electric shock.
