SharpShooter
®
with Rate Sync
®
- Turf Sprayer Edition
©2003, 2011, 2015 Capstan Ag Systems, Inc., All Rights Reserved | Version:
P-3.0
| 6/9/2016
9.0 - Troubleshooting
51
9.3 - TROUBLESHOOTING TESTS
9.3.1 - SharpShooter with Rate Sync Dry
Test
Verify Power to the SSRS Display
:
1.
[Figure 51]
- Turn on the SSRS Display. It will
default to the Manual Mode. A red light in the lower
left corner of the power button will illuminate
showing a properly working display.
2.
Observe that the SSRS Display screen reads
Manual Mode and a 50% duty cycle.
Service Actions:
If the SSRS Display does not power on, check the fuse
and/or trace the power from the battery. Check pins,
connectors and wires for proper contact and/or
damage.
9.3.2 - SSRS Menu Items
Verify that the SSRS Display and Rate Controller
programming parameters are set up correctly:
1.
[Figure 52]
- Power up the SSRS Display, and
press Menu. Do a check of the SSRS Display
parameters to verify correct settings. Reset if
necessary. Reset to default valves.
2.
Power up the Rate Controller. Verify the setup
parameters.
Figure 51: Verify Display Power
Figure 52: SSRS Menu Items
This confirms that the SSRS Display
pigtail harness fuse is functioning and
that power is being received.
