Capron Sunlight A68 2018, Инструкция по эксплуатации

Страница: 56 / 138

Gas system
56
2999828 - 05/18 - EHG-0012-00EN
7
You may also change an empty gas bottle while gas-operated devices are in
operation.

Turn the knob (Fig. 44,1) a half turn in the direction of the currently used
gas bottle. In this way, this gas bottle is the primary bottle now, and the
empty gas bottle becomes the reserve bottle. The marking in the inspec-
tion window (Fig. 44,2) changes from red to green.

Close regulator tap (Fig. 43,2) on the empty gas bottle. Pay attention to
the direction of the arrow.

Unscrew the gas tube from the empty gas bottle (normally a left-hand
thread).

Release the fixing belts and remove the empty gas bottle.

Place a filled gas bottle in the gas bottle compartment and retain with
the fixing belts.

Connect gas tube to the filled gas bottle (normally a left-hand thread).

Open the regulator tap on the gas bottle.

Press the green button of the hose break guard (Fig. 43,1).
7.4 Changing gas bottles

When changing gas bottles, do not smoke or create any open fire.
 When you have changed the gas bottle, check whether gas escapes
at the connection points and unions. Use a leakage search spray to
spray the relevant connection point or union. These agents are
available at the accessories shop.

The procedure described below applies to vehicles that are equipped
with a single gas connection. If the vehicle is equipped with an regulating
system: When changing the gas bottle, proceed as described for the
regulating system.
Fig. 47 Gas bottle connection

Open flap for the gas bottle compartment.

Close the regulator tap (Fig. 47,4) on the gas bottle. Pay attention to the
direction of the arrow.

Hold the gas pressure regulator (Fig. 47,2) and open the knurled nut
(Fig. 47,3) (normally a left-hand thread).

Remove the gas pressure regulator and the gas tube (Fig. 47,1) from
the gas bottle.

Release the fixing belts and remove the gas bottle.
Changing the gas bottle: