28
29
Instruction manual WMi4000
Instruction manual WMi4000
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
PLEASE NOTE:
When a programme is selected, the display shows the recommended wash temperature that
can be reduced (where allowed) by the relevant button.
For the programmes shown you can adjust the duration and intensity of the wash using the
STAIN LEVEL button.
Selecting the RAPID programme on the knob, it will be possible to select with the RAPID
button, one of the three rapid programmes available among 14’, 30’ and 44’.
*STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and No 1061/2010.
COTTON PROGRAMME WITH A TEMPERATURE OF 60°C.
COTTON PROGRAMME WITH A TEMPERATURE OF 40°C.
These programmes are suitable to clean normally soiled cotton laundry and they are the most
efficient programmes in terms of combined energy and water consumptions for washing cotton
laundry.
These programmes have been developed to be compliant with the temperature on the wash
label on the garments and the actual water temperature may slightly differ from the declared
temperature of the cycle.
C L E A N I N G A N D M A I N T E N A N C E
To clean the washing machine exterior, use a damp cloth, avoiding abrasives, alcohol and/
or solvents. To maintain a good wash performance we recommend that the soap drawer and
pump filters are regularly cleaned. A monthly service wash, using a proprietary cleaner is also
recommended.
D R AW E R C L E A N I N G
We recommend you clean the drawer to avoid accumulating detergent and additive residue.
To do this, extract the drawer using slight force, clean it with running water and reinsert it in its
housing.
Ensure the siphon cap is correctly refitted.
F I LT E R C L E A N I N G
The washing machine comes with a special
filter able to trap large residue, such as
buttons or coins, which could clog the
drain.
Ensure all the water has been emptied
from the drum.
Before unscrewing the filter, we recommend you place an absorbent cloth under it to keep the
floor dry. A small amount of water will come out of the filter as you remove it - this is normal.
Turn the filter counter-clockwise to the stop limit.
Remove and clean the filter; when finished, replace it turning it clockwise. The filter handle will be
locked when it is not possible to turn any further and the handle is horizontal. Applying a small
amount of liquid soap on the filter seal will help refitting.
Repeat the previous steps in reverse order to reassemble all parts.
