20
21
Instruction manual WMi4000
Instruction manual WMi4000
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Press the
START/PAUSE
button again to re-start the programme from the point it had been
paused at.
C A N C E L L I N G T H E P R O G R A M M E
To cancel the programme, set the selector to the
OFF
position.
D E L AY S TA RT B U T TO N
This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to
24 hours.
To delay the start use the following procedure:
› Select the required programme.
› Press the delay start button once to activate it (h00 appears on the display) and then
press it again to set a 1 hour delay (h01 appears on the display). The pre-set delay
increases by 1 hour each time the button is pressed, until h24 appears on the display, at
which point pressing the button again will reset the delay start to zero.
› Confirm by pressing the START/PAUSE button. The delay countdown will begin and when it
has finished the programme will start automatically.
It is possible to cancel the delay start by turning the programme selector to
OFF
.
If there is any break in the power supply while the machine is operating, a special memory
stores the selected programme and, when the power is restored, it continues where it left
OFF
.
The function buttons should be selected before pressing the
START/PAUSE
button.
F U N C T I O N B U T TO N
This button allows you to choose between three different functions:
E X T R A R I N S E
This function allows you to add one rinse at the end of the washing cycle and is useful for
people with delicate and sensitive skin, for which a small amount of detergent residue can
cause irritations or allergies.
It is advisable to also use this function for children’s clothes and for washing heavily soiled
items, which requires a lot of detergent to be used, or for washing towelling items whose fibres
mostly have the tendency to hold the detergent.
H Y G I E N E +
Activated when you set 60°C of temperature. This function allows deep cleaning of your clothes
by maintaining the same temperature for the whole wash.
E A S Y I R O N
This function allows you to minimises creases as much as possible, eliminating the intermediate
spins or reducing the intensity of the last one.
If a function is selected that is not compatible with the selected programme then the function
indicator light first flashes and then goes off.
R A P I D / S TA I N L E V E L B U T TO N
This button allows you to choose between two different function, depending on the
selected programme.
R A P I D
The button becomes active when you select the
RAPID (14/30/44 MIN.)
programme on the
knob and allows you to select one of three durations indicated.
S TA I N L E V E L B U T TO N
Once the programme has been selected the wash time set for that programme will be
automatically shown.
This function allows you to choose between 3 levels of wash intensity modifying the length
of the programme, depending on how much the fabrics are soiled (can only be used on some
programmes as shown in the table of programmes).
T E M P E R AT U R E S E L E C T I O N B U T TO N
This button allows you to change the temperature of the wash cycles.
It is not possible to raise the temperature over the maximum allowed for the programme, in
order to protect the fabrics.
If you want carry out a cold wash all the indicators must be off.
