Instruction manual Wi6232
Please keep this instruction manual for future reference
11
CONTROL PANEL
Indicator light illuminates to signify the cooling mode is currently in operation
TOUCH CONTROL KEYS
Used to switch the internal light on/off
To switch the appliance on/off
(press and hold this button for approximately 3 seconds)
Used to raise the temperature in 1ºC increments
Used to lower the temperature in 1ºC increments
TEMPERATURE ALARM
If inner temperature is higher than 23°C, “HI” is shown in the display panel,
and the alarm sounds after one hour continously. It warns you that the inner
temperature is too high.
If inner temperature is lower than 0°C, “LO” is shown in the display panel, the
alarm sounds and the malfunction indicator lights at the same time.
Temperature Alarm
If inner temperature is higher than 23°C,
display panel, and the
continuously.
“HI” is shown in the
It warns you that the inner temperature is
alarm sounds after one hour
too high.
If inner temperature is lower than 0°C, “LO” is shown in the display
alarm sounds and the malfunction indicator lights at the same time.
panel, the
Control panel
•
“ ”
Indicator light illuminates to signify the cooling mode is currently in operation.
•
“ ”Button
Used to switch the internal light on/off.
•
“ ” Button
To switch the appliance on/off
(press and hold this buttons for approximately 3 seconds).
•
“ ” Button
Used to raise the temperature in 1ºC increments.
•
“ ” Button
Used to lower the temperature by in 1ºC increments.
Setting the temperature
•
To set the temperature, connect the power cord to a properly grounded outlet. In the event of
a power interruption, the previous temperature setting is automatically erased and it will default
to a preset temperature setting of 12°C
•
Set the desired cooling temperature by pressing the buttons adjacent to the “ / "
indicators. Each press of the buttons will scroll through the available temperature settings in
increments of 1°C.
•
The temperature setting can be adjusted from 5°C to 18°C
•
To view the actual temperature at anytime press and hold the temperature adjustment button
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in the
LED display for 5 Seconds. After this it will revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Note
•
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
•
When you use the wine cabinet for the first time or you restart the cabinet after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the wine cabinet has been running for a few hours everything will be back
to normal.
5
Control panel
•
“ ”
Indicator light illuminates to signify the cooling mode is currently in operation.
•
“ ”Button
Used to switch the internal light on/off.
•
“ ” Button
To switch the appliance on/off
(press and hold this buttons for approximately 3 seconds).
•
“ ” Button
Used to raise the temperature in 1ºC increments.
•
“ ” Button
Used to lower the temperature by in 1ºC increments.
Setting the temperature
•
To set the temperature, connect the power cord to a properly grounded outlet. In the event of
a power interruption, the previous temperature setting is automatically erased and it will default
to a preset temperature setting of 12°C
•
Set the desired cooling temperature by pressing the buttons adjacent to the “ / "
indicators. Each press of the buttons will scroll through the available temperature settings in
increments of 1°C.
•
The temperature setting can be adjusted from 5°C to 18°C
•
To view the actual temperature at anytime press and hold the temperature adjustment button
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in the
LED display for 5 Seconds. After this it will revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Note
•
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
•
When you use the wine cabinet for the first time or you restart the cabinet after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the wine cabinet has been running for a few hours everything will be back
to normal.
5
Control panel
•
“ ”
Indicator light illuminates to signify the cooling mode is currently in operation.
•
“ ”Button
Used to switch the internal light on/off.
•
“ ” Button
To switch the appliance on/off
(press and hold this buttons for approximately 3 seconds).
•
“ ” Button
Used to raise the temperature in 1ºC increments.
•
“ ” Button
Used to lower the temperature by in 1ºC increments.
Setting the temperature
•
To set the temperature, connect the power cord to a properly grounded outlet. In the event of
a power interruption, the previous temperature setting is automatically erased and it will default
to a preset temperature setting of 12°C
•
Set the desired cooling temperature by pressing the buttons adjacent to the “ / "
indicators. Each press of the buttons will scroll through the available temperature settings in
increments of 1°C.
•
The temperature setting can be adjusted from 5°C to 18°C
•
To view the actual temperature at anytime press and hold the temperature adjustment button
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in the
LED display for 5 Seconds. After this it will revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Note
•
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
•
When you use the wine cabinet for the first time or you restart the cabinet after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the wine cabinet has been running for a few hours everything will be back
to normal.
5
Control panel
•
“ ”
Indicator light illuminates to signify the cooling mode is currently in operation.
•
“ ”Button
Used to switch the internal light on/off.
•
“ ” Button
To switch the appliance on/off
(press and hold this buttons for approximately 3 seconds).
•
“ ” Button
Used to raise the temperature in 1ºC increments.
•
“ ” Button
Used to lower the temperature by in 1ºC increments.
Setting the temperature
•
To set the temperature, connect the power cord to a properly grounded outlet. In the event of
a power interruption, the previous temperature setting is automatically erased and it will default
to a preset temperature setting of 12°C
•
Set the desired cooling temperature by pressing the buttons adjacent to the “ / "
indicators. Each press of the buttons will scroll through the available temperature settings in
increments of 1°C.
•
The temperature setting can be adjusted from 5°C to 18°C
•
To view the actual temperature at anytime press and hold the temperature adjustment button
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in the
LED display for 5 Seconds. After this it will revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Note
•
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
•
When you use the wine cabinet for the first time or you restart the cabinet after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the wine cabinet has been running for a few hours everything will be back
to normal.
5
Control panel
•
“ ”
Indicator light illuminates to signify the cooling mode is currently in operation.
•
“ ”Button
Used to switch the internal light on/off.
•
“ ” Button
To switch the appliance on/off
(press and hold this buttons for approximately 3 seconds).
•
“ ” Button
Used to raise the temperature in 1ºC increments.
•
“ ” Button
Used to lower the temperature by in 1ºC increments.
Setting the temperature
•
To set the temperature, connect the power cord to a properly grounded outlet. In the event of
a power interruption, the previous temperature setting is automatically erased and it will default
to a preset temperature setting of 12°C
•
Set the desired cooling temperature by pressing the buttons adjacent to the “ / "
indicators. Each press of the buttons will scroll through the available temperature settings in
increments of 1°C.
•
The temperature setting can be adjusted from 5°C to 18°C
•
To view the actual temperature at anytime press and hold the temperature adjustment button
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in the
LED display for 5 Seconds. After this it will revert back to the set temperature.
Flashing LED = Cabinet temperature
Steady LED = Set temperature
Note
•
If the unit is unplugged, power lost or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the wine cabinet will not start.
•
When you use the wine cabinet for the first time or you restart the cabinet after having been shut
off for a long time, there could be a few degrees variance between the temperature you select
and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the wine cabinet has been running for a few hours everything will be back
to normal.
5
WI6232 Wine Cabinet manual.indd 11
29/08/2018 10:19
