Instruction manual Wi6232
Please keep this instruction manual for future reference
20
Problem
Possible Cause
The wine cabinet
does not operate
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
The wine cabinet is
not cold enough
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The compressor
turns on and off
frequently
The room temperature is hotter than normal.
A large amount of contents has been added to the wine cabinet.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not
work
The circuit breaker tripped or a blown fuse.
The bulb has burned out.
The light button is “OFF”.
Vibrations
Check that the appliance is level and installed on a flat, even surface.
The wine cabinet
seems to make too
much noise.
The rattling noise may come from the flow of the refrigerant, which is
normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of
refrigerant in your wine cabinet.
Contraction and expansion of the inside walls may cause popping and
crackling noises, this is normal.
The wine cabinet is not level.
The door will not
close properly
The wine cabinet is not level.
The door was reversed and not correctly installed.
The gasket is dirty.
The shelves are out of position.
If the above table has not solved the problem please contact Caple Service by
phone on
0117 938 7420
or by email
TROUBLESHOOTING GUIDE
PROBLEMS WITH YOUR WINE CABINET
You can solve many common wine cabinet problems easily, saving you the cost of a
possible service call. Try the suggestions below to see if you can solve the problem
before calling
Caple Service
.
WI6232 Wine Cabinet manual.indd 20
29/08/2018 10:19
