Caple WI152, Техническая информация

Страница: 20 / 27

16/23
6.2.4．How to remove the evaporator
The process: remove the shelves → remove the air-duct board → remove the evaporator
After remove the air-duct board, we can see the evaporator
（Fig.16） ,
Heat the solder joint A, D,
separate them by using the plier （Fig.13） . Remove the evaporator fixing screws, remove the
evaporator. （Fig.16）
Fig.13
Fig.15
A
A: Suction pipe solder joint
B: Filter and condenser pipe solder joint
C: Process pipe
D: Filter and capillary solder joint
E:
Condenser and compressor solder joint
Four legs
Fig.14
Four screws
Condenser
B
C
D
E
Six screws