Caple WI152, Техническая информация

Страница: 19 / 27

15/23
6.2.2．How to remove the condenser fan.
The process: remove the decorative cover → remove the condenser fan
Remove the two decorative cover fixing screws, take away the decorative cover, and remove two fan fixing
screws, the condenser fan can be removed.
(Fig.11 & Fig.12)
6.2.3．How to remove the compressor.
The process: separate the solder joints → remove the cabinet legs → remove the compressor fixing
screws.
Release the refrigerant by cutting the process pipe C, then heat the suction pipe and separate it by using
the plier, heat the filter and condenser joint and separate it by use plier. (Fig.13 ). Remove four cabinet
legs, then remove six compressor supporter fixing screws, take away the whole part. Heat the condenser
and compressor solder joint, separate it by using the plier. Remove four compressor fixing screws by
using the spanner, remove the compressor. (Fig.14 & Fig.15 所示) 。
Fig.12
Decorative
cover