Instruction manual DI652
38
Please keep this instruction manual for future reference
U N D E R N E AT H E X I S T I N G WO R K TO P
In most modern fitted kitchens there is only one single
work top under which cabinets and electrical appliances are
fitted. In this case remove the work top of the dishwasher by
unscrewing the screws under the rear edge of the top (A).
ATTENTION:
After removing the work top, the screws must be screwed again under the rear edge of the
top (B).
The height will then be reduced to 815mm, as scheduled by the International Regulations (ISO)
and the dishwasher will fit perfectly under the kitchen working top.
B U I LT- I N I N S TA L L AT I O N ( F O R T H E I N T E G R AT E D M O D E L )
S E L E C T I N G T H E B E S T L O C AT I O N F O R T H E D I S H WA S H E R
The installation position of the dishwasher should be near the existing inlet and drain hoses and
power cord.
See below for illustrations of cabinet dimensions and installation positions of the dishwasher.
1. Less than 5mm between the top of the dishwasher and cabinet and the outer door aligned
to cabinet.
2. If dishwasher is installed at the corner of the cabinet, there should be some space when the
door is opened.
23
Underneath existing work top
(
When fitting beneath a work top)
In most modern fitted kitchens there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case remove
the work top of the dishwasher by unscrewing the
screws under the rear edge of the top (
A
).
A
A
B
B
Built-In Installation
(for the
integrated model)
Step 1. Selecting the best location for the dishwasher
The installation position of dishwasher should be near the existing inlet and drain hoses
and power cord.
Illustrations of cabinet dimensions and installation position of the dishwasher.
1.
Less than 5 mm between the top of dishwasher and cabinet and the outer door
aligned to cabinet.
90°
90°
580mm
820mm
100
Electrical, drain
and water supply
line entrances
Space between cabinet
bottom and floor
600 mm (for 60cm model
)
450 mm (for 45cm model)
80
After removing the work top, the screws must be screwed again under the rear edge
of the top (
b
).
Attention
The height will then be reduced to 815 mm, as scheduled by the International
Regulations (ISO) and the dishwasher will fit perfectly under the kitchen working top
23
Underneath existing work top
(
When fitting beneath a work top)
In most modern fitted kitchens there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case remove
the work top of the dishwasher by unscrewing the
screws under the rear edge of the top (
A
).
A
A
B
B
Built-In Installation
(for the
integrated model)
Step 1. Selecting the best location for the dishwasher
The installation position of dishwasher should be near the existing inlet and drain hoses
and power cord.
Illustrations of cabinet dimensions and installation position of the dishwasher.
1.
Less than 5 mm between the top of dishwasher and cabinet and the outer door
aligned to cabinet.
90°
90°
580mm
820mm
100
Electrical, drain
and water supply
line entrances
Space between cabinet
bottom and floor
600 mm (for 60cm model
)
450 mm (for 45cm model)
80
After removing the work top, the screws must be screwed again under the rear edge
of the top (
b
).
Attention
The height will then be reduced to 815 mm, as scheduled by the International
Regulations (ISO) and the dishwasher will fit perfectly under the kitchen working top
Space between cabinet
bottom and floor
