Caple di476, Инструкция по эксплуатации

Страница: 24 / 32

19
【 】
Figure 7
Dishwasher installation steps ●
1
2
.
3 .
4 .
5 .
6
7
8
Install the furniture door to the outer door of the di shwasher using the brackets provided. Re fer
to the template for positioning of the brackets.
Adjust the tension of the door springs by using an Allen key turn ing in a clockwise motion to
tighten the left and right door springs. Failure to do this could cause damage to your dishwasher
(Illustration 2)
Connect the inlet hose to the cold water supply
Connect the drai n hose. Refer to diagram (Figure 6)
Connect the power cord
Affix the condensation strip under the work surface of cabinet. Please ensure th e condensation
strip is flush wi th edge of work surface.
Place the dishwasher into position.(Illustration 4)
Level
the dishwasher. The rear f
eet
can be adjusted from the front of the dishwasher by turning
the Allen screw in the m iddle of the base of dishwasher use an Allen key (Illustration 5A). To adjust
the front feet, use a flat scre w driver and turn the front feet until the dishwasher is level (Illustration 5B).
9 The dishwasher must be secured in place. The re are two ways to do this:
A. Normal work surface :Put the installation hook into the slot of the side plane and secure it to the
work surface with the wood screws (Illustration 6).
B. Marble or granite work top: Fix
through
the side
of the dishwasher using the s
crew
s
. (Illustration 7).