Instruction manual CM465SS
24
25
Please keep this instruction manual for future reference
Please keep this instruction manual for future reference
Instruction manual CM465SS
C A R RY I N G O U T T H E D E S C A L I N G P R O G R A M
When the display shows “PLEASE DESCALE!”, the appliance must be descaled.
1. Insert the hot water nozzle.
2. Press the touch key ‘MENU’ and press the scroll touch keys until the
menu option “DESCALE” appears. Confirm the menu option with the
touch key ‘OK’.
3. The display shows ”PLEASE CONFIRM”. Confirm with the touch key
‘OK’. The descaling program starts.
The top line of the display alternates between “ADD DESCALER” and
“PLEASE CONFIRM”.
4. Empty the tank of water, pour the contents of the descaler pack into
the tank respecting the instructions given on the descaler pack, then
add water. For subsequent descaling operations, descaling solutions
can be purchased from www.caple.co.uk.
Make sure that any splashes from the descaling product do not come into contact
with surfaces that are sensitive to acids, such as marble, limestone and ceramic.
5. Put a container with a capacity of at least 2 litres underneath the hot
water nozzle.
6. Press the touch key ‘OK’ (9). The display shows “DESCALING”.The
descaling liquid runs out of the hot water nozzle. The descaling program
automatically goes through a serie of rinses and pauses to remove
limescale deposits from the inside of the coffee machine. After about 30
minutes the water tank is empty and the top line of the display alternates
between “DESCALE COMPLETE” and “PLEASE CONFIRM”.
7. Press the touch key ‘OK’ (9). The display shows “RINSING, FILL TANK”.
The appliance is now ready for a rinsing process with clean water.
8. Empty the container under the hot water nozzle and put it back under the
hot water nozzle.
9. Take out the water tank and fill it with clean water.
10. Put the water tank back in place. The display shows: “RINSING”.
11. Press the touch key ‘OK’ (9). A rinsing process takes place with
cleanwater and the rinsing water runs out of the hot water nozzle. After
a few minutes the water tank is empty and the display shows “RINSING
COMPLETE PLEASE CONFIRM”.
EN 22
SETTINGS
Setting the coffee temperature
You can choose between three temperature levels. The coffee
temperature levels are defined as follows:
• TEMPERATURE LOW
• TEMPERATURE MEDIUM
• TEMPERATURE HIGH
The factory setting is TEMPERATURE HIGH. You can change this as follows:
1.
Press the touch key ‘MENU’ and press the scroll touch keys until the menu option
“TEMPERATURE” appears. Confirm the
menu option with the touch key ‘OK’
.
2.
The display shows the current setting. Select another temperature
with the scroll touch keys.
When the desired temperature is
displayed, confirm it with the touch key ‘OK’.
Setting the switch-off time
The appliance is set by default to go off automatically 30 minutes after the last coffee has
been made. To change this interval (max. 120 min), proceed as follows:
• AUTO SHUTOFF TIME 1/2 hour
• AUTO SHUTOFF TIME 1 hour
• AUTO SHUTOFF TIME 2 hour
You can change this as follows:
1.
Press the touch key ‘MENU’ and press the scroll touch keys until the menu option “AUTO
SHUTOFF TIME” appears.
Confirm the menu option with the touch key ‘OK’.
2.
Select another switch-off time with the scroll touch keys.
When the desired switch-off
time is displayed, confirm it with the
touch key ‘OK’.
Carrying out the descaling program
When the display shows “PLEASE DESCALE!”, the appliance must be descaled.
1.
Insert the hot water nozzle.
2.
Press the touch key ‘MENU’ and press the scroll touch keys
until the
menu option “DESCALE” appears. Confirm the menu
option with the
touch key ‘OK’
.
3.
The display shows ”PLEASE CONFIRM”. Confirm with the touch key
‘OK’. The descaling program starts.
The top line of the display alternates between “ADD DESCALER”
and
“PLEASE CONFIRM”.
4. Empty the tank of water, pour the contents of the descaler pack
into the tank respecting the
instructions given on the descaler pack,
then add water. For subsequent descaling operations,
descaling
solu tion
s
can be purchased from authorised technical service
centres.
Make sure that any splashes from the descaling product do not come into contact with
surfaces that are sensitive to acids, such as marble, limestone and ceramic.
EN 23
SETTINGS
5.
Put a container with a capacity of at least
2 litres underneath the hot
water nozzle.
6.
Press the touch key ‘OK’ (9). The display shows “DESCALING”.The
descaling liquid runs out of the hot water nozzle.
The descaling program automatically goes through a serie of rinses
and pauses to remove limescale deposits from the inside of the
coffee machine. After about 30 minutes the water tank is empty
and
the top line of the display alternates between “DESCALE
COMPLETE” and “PLEASE CONFIRM”.
7.
Press the touch key ‘OK’ (9). The display shows “RINSING, FILL
TANK”. The appliance is now ready for a rinsing process with clean
water.
8.
Empty the container under the hot water nozzle and put it back
under the hot water nozzle.
9.
T a
k
e out the water tank and fill it with clean water.
10.
Put the water tank back in place. The display shows: “PLEASE
CONFIRM”.
11.
Press the touch key ‘OK’ (9). A rinsing process takes place with
clean water and the rinsing water runs out of the hot water nozzle.
After a few minutes the water tank is empty and the display shows
“PLEASE CONFIRM”.
12.
Press the touch key ‘OK’ (9). The display shows “RINSING
COMPLETE CONFIRM”.
13.
Press the touch key ‘OK’ (9). The display shows “DESCALE
COMPLETE” and then “FILL TANK!”
14.
Take out the water tank, fill it with clean water and put it back in
place.
The appliance is now ready for use again and is back to the last
coffee mode selected.
5
2
7
9
Note:
If the descaling cycle is interrupted before completion, the appliance continues to
display the descale message and the program must be started again from the beginning.
Failure to descale the appliance invalidates the guarantee.
U
USSEE O
OU
URR A
ARRTTW
WO
ORRK
K
12. Press the touch key ‘OK’ (9). The display shows “DESCALE COMPLETE” and then “FILL TANK!”
13. Take out the water tank, fill it with clean water and put it back in place.
The appliance is now ready for use again and is back to the last coffee mode selected.
N OT E :
If the descaling cycle is interrupted before completion, the appliance continues
to display the descale message and the program must be started again from the
beginning. Failure to descale the appliance invalidates the guarantee.
R I N S I N G
If 2/3 minutes have passed, since you last made coffee, you should first rinse the system to preheat
the brewing unit. Select the rinsing function from the appropriate menu. Let the water run into the
drip tray underneath. You can also use this water to warm up the cup that you are using for the
coffee. In this case simply let the hot water run into the cup (and then empty it).
1. Press the touch key ‘RINSE’ (4).
2. The appliance performs an automatic rinse cycle (a little hot water
runs out of the spouts and is collected in the drip tray beneath).
MENU
EXIT
OK
2
5
7
9
MENU
EXIT
OK
4
