24
Scenario conflict
This conflict occurs if the positioning of the pans on the hob is not clear.
The conflict is always shown on the display. Lift one or more pans until the problem is solved.
The pans are seen as newly placed pans; all settings that have been set for the pans are disappeared.
Example of conflict:
o
2 pans placed at the same moment on the hob.
o
2 pans moved at the same moment on the hob.
Interface conflict
The display cannot correctly show the position of the pans on the hob.
Move pans to solve the conflict. Then you will be able to set the power level.
It is possible to put max. 6 pans on the hob.
Pan conflict
The induction hob detects pans that are larger than 100 mm and smaller than 145 mm. But these small pans cannot
be used on every position on the hob.
An induction coil needs to be covered for at least 10% to be able to heat up a pan.
If a small pan does not heat up on a specific position, move it a little bit to a different position.
In pan selection mode, a small pan that is not on a correct position shows in a grey colour with an exclamation mark.
Press the exclamation mark to show the info message.
Example:
