14 Instruction manual C775G, C750G, C768G
Please keep this instruction manual for future reference
H O W TO U S E YO U R A P P L I A N C E
The following symbols will appear on the control panel, next to each control handle:
› The minimum setting is at the end of the anti-clockwise rotation of the control handle.
› All operation positions must be selected between the maximum and minimum position.
› The symbol on the control panel, next to the control handle will indicate which burner
it operates.
AU TO M AT I C I G N I T I O N W I T H F L A M E FA I L U R E S A F E T Y D E V I C E
The appliance is fitted with a flame failure safety device on each burner, which is designed to stop
the flow of gas to the burner head in the event of the flame going out.
TO I G N I T E A B U R N E R :
› Press in the control knob of the burner that you wish to light and turn it anti-clockwise to
the maximum position.
› If you keep the control knob depressed, the automatic ignition for the burner will operate.
› You should hold down the control knob for 15 seconds after the flame on the burner has lit.
If after 15s the burner has not lit, stop operating the device and open the compartment door
and/or wait at least 1 min before attempting a further ignition of the burner.
› After this 15-second interval, to regulate the flame you should continue turning the control
knob anti-clockwise until the flame is at a suitable level.
› The operating position MUST be at a position between the maximum and minimum position.
› To switch the burner off, turn the control knob fully clockwise to the gas off position.
› In case of power failure, the burners can be lit by carefully using a match.
AUTOMATIC IGNITION WITH FLAME FAILURE SAFETY DEVICE
The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of
gas to the burner head in the event of the flame going out.
TO IGNITE A BURNER:
> Press in the control knob of the burner that you wish to light and turn it anti-clockwise
to the maximum position.
> If you keep the control knob depressed, the automatic ignition for the burner will operate.
>You should hold down the control knob for 15 seconds after the flame on the burner has lit. If after 15s the
burner has not lit, stop operating the device and open the compartment door and/or wait at least 1 min before
attempting a further ignition of the burner.
> After this 15-second interval, to regulate the flame you should continue turning the control knob anti-
clockwise until the flame is at a suitable level.
> The operating position MUST be at a position between the maximum and minimum position.
> To switch the burner off, turn the control knob fully clockwise to the gas off position.
> In case of power failure, the burners can be lit by carefully using a match.
> The minimum setting is at the end of the anti-clockwise rotation of the control handle.
> All operation positions must be selected between the maximum and minimum position.
> The symbol on the control panel, next to the control handle will indicate which burner it operates.
The following symbols will appear on the control panel, next to each control handle :
Black circle: gas off
Large flame: maximum setting
Small flame: minimum setting
H O W TO U S E YO U R A P P L I A N C E