Safety valve
It is mandatory to install a safety valve to allow the
gas supply to be opened and closed.
Install the safety valve between the gas supply line to
the relevant room and the appliance. Ensure that
there is unhindered access to this valve.
Testing for leaks
Once the gas line is connected, check for leaks in the
connections using soapy water.
Initial use
Switch the appliance on as described in the
instruction manual.
Light all the burners and check that the flames remain
stable at both the high and low settings.
IMPORTANT NOTE
This appliance is supplied for use on NATURAL GAS or LPG (check the gas
regulation label attached on the appliance).
•
Appliances supplied for use on NATURAL GAS: they are adjusted for
this gas only and cannot be used on any other gas (LPG) without modification.
The appliances are manufactured for conversion to LPG.
•
Appliances supplied for use on LPG: they are adjusted for this gas only
and cannot be used on any other gas (NATURAL GAS) without modification.
The appliances are manufactured for conversion to NATURAL GAS.
If the NATURAL GAS/LPG conversion kit is not supplied with the appliance this
kit can be purchased by contacting the Manufacturer.
Installation & service regulations (United Kingdom)
It is a legal requirement that all gas appliances are Installed & Serviced by a
competent person in accordance with the current editions of the following
Standards & Regulations or those regulations appropriate to the geographical
region in which they are to be installed:
•
Gas Safety (Installation & Use) Regulations
•
Building Regulations
•
British Standards
•
Regulations for Electrical Installation
Installation and service of any gas product must be made by a suitably qualified
person competent on the type of product being installed or serviced and holding
a valid certificate of competence for the work being carried out. Currently the
proof of competence is the Accredited Certification Scheme (ACS) or S/NVQ
that has been aligned to the ACS.
It is also a requirement that all businesses or self employed installers are
members of a class of person approved by the Health and Safety Executive.
Failure to install the appliance correctly could invalidate any manufacturer’s
warranty and lead to prosecution under the above quoted regulation.
9
• Unscrew the nozzle and replace it with a nozzle which is suitable for use with
the new type of gas.
• To reassemble, follow the instructions in reverse order.
