Caple C1081G, Инструкция по эксплуатации

Страница: 29 / 40

29 Instruction manual C981G & C1081G
Please keep this instruction manual for future reference
G A S C O N V E R S I O N A N D A D J U S T M E N T S
If the appliance is prearranged for a type of gas different from the available type, the burner
nozzles must be changed and the control card must be set up with the parameters relative to the
new configuration.
C H A N G I N G T H E N O Z Z L E S :
Choose the required nozzles with reference to the following “Technical Specifications” table.
Proceed as follows:
› Remove the pan stands and burners from the hob.
› Unscrew nozzles U (Fig.5) and U1/U2 (Fig.6) using a socket spanner (L), and replace with the
correct nozzle for the available gas type.
› Secure the nozzle without over-tightening.
G A S C O N V E R S I O N A N D A D J U S T M E N T S
If the appliance is prearranged for a type of gas different from the available type, the burner nozzles
must be changed and the control card must be set up with the parameters relative to the new
configuration.
C H A N G I N G T H E N O Z Z L E S :
Choose the required nozzles with reference to the following “Technical Specifications” table.
Proceed as follows:
›
Remove the pan stands and burners from the hob.
› Unscrew nozzles U (Fig.5) and U1/U2 (Fig.6) using a socket spanner (L),
and replace with the correct nozzle for the available gas type.
› Secure the nozzle without over-tightening.
Fig.5
Fig.6
G A S C O N V E R S I O N A N D A D J U S T M E N T S
If the appliance is prearranged for a type of gas different from the available type, the burner nozzles
must be changed and the control card must be set up with the parameters relative to the new
configuration.
C H A N G I N G T H E N O Z Z L E S :
Choose the required nozzles with reference to the following “Technical Specifications” table.
Proceed as follows:
› Remove the pan stands and burners from the hob.
›
Unscrew nozzles U (Fig.5) and U1/U2 (Fig.6) using a socket spanner (L),
and replace with the correct nozzle for the available gas type.
› Secure the nozzle without over-tightening.
Fig.5
Fig.6
F I G. 5 F I G. 6