31
Instruction manual C981G & C1081G
Please keep this instruction manual for future reference
M I N I M U M F L O W A D J U S T M E N T ( C 9 8 1 G )
The minimum flow is correctly adjusted when the flame remains lit without a pot on the pan
support in position 1 of the burner control.
To adjust the minimum flow of each burner, proceed as follows:
MIN
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the figure above.
“MIN” will appear on the display indicating the activation of the adjustment procedure.
At this stage, select the burner to be adjusted using the “+” and “-” buttons. By pressing these
buttons repeatedly, a LED will light up showing the selected burner
To confirm the selected burner, press the timer button.
9
The selected burner will light on the maximum setting. It will automatically start a test and it is not
possible to take action now. The test ends at postion 1.
M I N I M U M F L O W A D J U S T M E N T ( C 9 8 1 G )
The minimum flow is correctly adjusted when the flame remains lit without a pot on the pan
support in position 1 of the burner control.
To adjust the minimum flow of each burner, proceed as follows:
MIN
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the figure above.
“MIN” will appear on the display indicating the activation of the adjustment procedure.
At this stage, select the burner to be adjusted using the “+” and “-” buttons. By pressing these
buttons repeatedly, a LED will light up showing the selected burner
To confirm the selected burner, press the timer button.
9
The selected burner will light on the maximum setting. It will automatically start a test and it is not
possible to take action now. The test ends at postion 1.
M I N I M U M F L O W A D J U S T M E N T ( C 9 8 1 G )
The minimum flow is correctly adjusted when the flame remains lit without a pot on the pan
support in position 1 of the burner control.
To adjust the minimum flow of each burner, proceed as follows:
MIN
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the figure above.
“MIN” will appear on the display indicating the activation of the adjustment procedure.
At this stage, select the burner to be adjusted using the “+” and “-” buttons. By pressing these
buttons repeatedly, a LED will light up showing the selected burner
To confirm the selected burner, press the timer button.
9
The selected burner will light on the maximum setting. It will automatically start a test and it is not
possible to take action now. The test ends at postion 1.
M I N I M U M F L O W A D J U S T M E N T ( C 9 8 1 G )
The minimum flow is correctly adjusted when the flame remains lit without a pot on the pan
support in position 1 of the burner control.
To adjust the minimum flow of each burner, proceed as follows:
MIN
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the figure above.
“MIN” will appear on the display indicating the activation of the adjustment procedure.
At this stage, select the burner to be adjusted using the “+” and “-” buttons. By pressing these
buttons repeatedly, a LED will light up showing the selected burner
To confirm the selected burner, press the timer button.
9
The selected burner will light on the maximum setting. It will automatically start a test and it is not
possible to take action now. The test ends at postion 1.
M I N I M U M F L OW A D J U S T M E N T ( C 9 8 1 G )
The minimum flow is correctly adjusted when the flame remains lit without a pot on the pan
support in position 1 of the burner control.
To adjust the minimum flow of each burner, proceed as follows:
Press the “+” and “-” buttons simultaneously for approx. 3 seconds as shown in the figure above.
“MIN” will appear on the display indicating the activation of the adjustment procedure.
At this stage, select the burner to be adjusted using the “+” and “-” buttons. By pressing these
buttons repeatedly, a LED will light up showing the selected burner.
To confirm the selected burner, press the timer button.
The selected burner will light on the maximum setting. It will automatically start a test and it is not
possible to take action now. The test ends at position 1.
Содержание C1081G
Страница 37: ...37 Instruction manual C981G C1081G Please keep this instruction manual for future reference NOTES ...
Страница 38: ...38 Instruction manual C981G C1081G Please keep this instruction manual for future reference NOTES ...
Страница 39: ...39 Instruction manual C981G C1081G Please keep this instruction manual for future reference NOTES ...
Страница 40: ...Caple Service Fourth Way Avonmouth Bristol BS11 8DW T 0117 938 1900 E service caple co uk www caple co uk ...
