TUTA-GW2 user manual
（
Version:V1.4)
5
1. Purchase a SIM/USIM card (mobile phone card) from 3G network service
and install it in the camera. This SIM/USIM card number is referred as
camera number on this brochure.
2. User should activate the MMS function and Caller ID Presentation
function of SIM/USIM card, and deactivate PIN code of the SIM/USIM card.
Contact your SIM/USIM card provider for more information.
3. Change the original password at the beginning use. Be sure to keep the
password and SIM/USIM card number secret. Do not disclose this
information to anyone other than the authorized users in order to ensure
your safety.
For your safety
This product is a wireless signal transmission device. Keep it away from
electronic equipment likely to interfere with the wireless signals, in order to
avoid signals interference.
Switch off your 3G alarm camera and mobile phone when entering areas
marked "Explosive", "Might explode", "Closed wireless transceiver devices"
etc.
Do not cast this product in a fire, as this may cause the battery to explode.
This product should only be operated from power approved by the product
manufacturer. The use of any other types of power may damage the product.
Keep the product and its accessories out of the children reach.
Declaration of conformity
1. We operate on a policy of continuous development. We reserve the right to
make changes and improvements to any of the products described in this
document without prior notice.
2. For the latest product information, please visit: http://www.i-tuta.com. We don
’
t
guarantee for the document veracity, reliability or any content except regulate in
proper laws. Including no guarantee for product suitable market or suitable area
promise.
3. Use only this product according to the law. Respect one another
’
s privacy.
Neither monitor another
’
s home nor private. We hold no responsibility for the
illegal use of this product.
