13
IIIustration 5
Step 1
：
Stick bolt (38) through the bent part
of the left arm (12) then place washer (51),
nut (47), Pec Deck cable (73) around the
bolt (38) and tighten with nut (45).
(
PEC DEC
CABLE
has a metal ring on
each end)
Step 2
：
Place the Pec Deck cable (73)
within the grooves of the 4” pulley (70).
Then align the 4” pulley (70) between the
teeth of the pulley brackets C (28) and
secure by using bolt (37), washers (51) and
nut (45).
Step 3
：
Find another 4” pulley (70) and
place the Pec Deck cable (73) within the
grooves and then attach the other pulley
bracket A (26) to the wheel and secure by
using bolt (37), washers (51) and nut (45).
Step 4
：
Using the same Pec Deck cable
(73) bring it back and fit it around another 4”
pulley (70) then secure the pulley by
attaching it to the pulley bracket C (28) by
using bolt (37), washers (51) and nut (45).
Finally, attach the end of the cable to the
right arm (13) using the same methods in
STEP 1.
