ENG 5
1. Press the Menu button twice.
2. Press the UP or DOWN button to select High or Low. The LCD Screen will display
"L" when the low power is selected. At low power mode, the PMR will transmit at
reduced transmitting range but could extend the battery life.
3. Press the TALK button again to confirm your selected power level.
3.7.3 Monitor
You can use the Monitor feature to check for weak signals on the current channel.
1. Press the Menu button 3 times. The PMR will enter the Monitor mode and hear
everything on the current channel.
2. Press the (Menu) button again to turn off the Monitor operation and return to
standby mode.
4. Auxiliary Features Channel Frequency Table
4.1 Power Saving
Your PMR unit has special circuitry designed to extend the life of your battery.
When the unit is not used for 6 seconds, it will automatically switch into a low power
mode. The Power Saving feature does not affect the PMR’s ability to receive
transmissions. When a signal is detected, it automatically returns to full power mode.
4.2 Low Battery Indicator
The PMR can detect when the battery charge level gets low. An alert tone will be
heard and the RED LED indicator will flash once every 15 seconds. When this happens,
replace the batteries.
Channel Frequency Table
Channel
Frequency (MHz)
Channel
Frequency (MHz)
1
446.00625
5
446.05625
2
446.01875
6
446.06875
3
446.03125
7
446.08125
4
446.04375
8
446.09375
Troubleshooting Guide
Symptom
Solution
No power.
。
Check the batteries are installed properly.
。
The batteries may be weak.
。
Replace the old batteries with new ones.
Reception
is weak.
。
Press the UP button to increase the receiver volume level.
。
The receiving signal may be weak and/or out of range.
