ENG 4
the mouth. While holding the TALK button, speak into the mic (microphone) in a
normal tone of voice.
3. Release the TALK button when you have finished transmitting.
＊
Important
1. In order to receive your transmission, other people must also be on the same
channel that you are currently using. Refer to the "Changing Channel" section for
more information.
2. When the TALK and/or CALL buttons are continuously pressed, your PMR cannot
receive any transmissions.
3.5 Calling (Paging) Tone
You can use the CALL button to send a tone to other users on the same channel.
To activate this feature
－
With the PMR in normal mode, press and release the CALL button. The unit will
transmit a 2-second page tone to the other unit/s set with the same channel within
transmitting range.
3.6 Channel Scan
Channel scan performs a search for active signals in a continuous loop from channels
1 to 8. This allows you to find other radios without having to manually change to each
channel.
To activate this feature
－
1. Press and hold down the SCAN button. The channel number on the LCD Screen
changes rapidly until an active signal is detected.
2. When an active signal (one of the 8 channels) is detected, the channel scan
pauses on the active channel until the active signal stops.
3. If you press the TALK button while the scan is paused on an active channel the
unit will communicate through the active signal channel, and the channel scan
will be deactivated. (OR press the UP button to continue the channel scanning.)
4. If no action is taken before the detected signal stops then the scan will continue.
5. Press and hold the SCAN button to stop the channel scanning operation. The unit
will return to the channel set before the scan was started.
3.7 The Menu Functions
3.7.1 Changing Channels
The PMR has 8 available channels. To change channel
－
1. Press the Menu button once, the Channel icon “8” will start blinking on the LCD
Screen.
2. While the Channel icon is blinking, press the UP or DOWN button to select the
desired channel. The channel changes from 1 to 8, or from 8 to 1.
3. Press the TALK button again to confirm your selected channel.
3.7.2 TX Power High/Low setting
This feature permits the selection of the transmitting power level to high or low. At
Power High, the PMR will transmit at maximum power and at a longer transmission
range.
