12
LEFT HANDLEBAR SWITCHES: REAR BRAKE LEVER
AND PARKING BRAKE LOCK
1 - Engine Stop Switch
With the Engine stop switch in the “OFF”
position the engine cannot be
started. With the Engine stop in the “RUN”
position the engine can be started.
2 - Rear brake lever
Rear brake is applied by squeezing the rear brake lever towards the grip.
3 - Electric start button
Depressing the electric start button will start the engine while the Ignition Key
Switch is in the “ON” and Engine Stop Switch is in the “RUN” position.
4 - Light switch. There are 3 positions on the light switch: “OFF”, “Daytime running
lights” and “Headlights”.
5 - High beam / low beam switch.
6 - Parking Brake Lock. While starting the engine or parking the machine, especially
on a slope, apply the parking brake by squeezing the rear brake lever and
pushing down the Parking Brake Lock.
7 - Manual Choke Lever. When engine is cold, place the choke lever to the ON
position. When engine has warmed up, place lever back to the OFF position.
8 - Turning light switch.
9 - Horn button switch.
Содержание 250
