manualshive.com logo in svg

CanyCom CM223, Руководство оператора, Страница: 72 / 94

Поделиться
Скачать
CanyCom CM223 Скачать руководство пользователя страница 72

-63-

Maintenance

5

Cutting System

Cutting Blades

1.  Open cutting blade shield.
2.  Visually inspect blades and bolts for wear
  

and damage. If blades or bolts are 
excessively worn, deformed, damged, or 
missing, replace them with new components.

3.  Close cutting blade shield.

5323M-0509-010E

When New

2mm

Inspecting

 • When a blade is damaged, replace it and the other blade immediately. Always 

replace blades in pair. Damage due to vibration may occur.

 • When replacing blades, always replace carriage bolts also.

 • When a foreign object is tangled with the blade, immediately stop the engine 

and remove the foreign object. Damage due to vibration may occur.

 • Blades have sharp edges. When replacing blades, use special tool, wear thick 

gloves, or wrap the blade with thick cloth and handle carefully.

 • Stop engine and remove ignition key when servicing.

 • Allow machine to cool off before servicing. Engine and its ancillaries are very 

hot after operation and may pose a burn hazard.

 •  Wear Limit: to the solid line in the figure on 

the left.

NOTE

Содержание CM223































































































Отзывы:

Нет отзывов