CanyCom CM223 Скачать руководство пользователя страница 67

Страница: 67 / 94

Maintenance

-58-

Front Knuckle Oil (CMX222 Only)

1.  Park machine on a level ground.
2.  Have an appropriate oil drain pan.
3.  Remove front knuckle oil drain plug to drain

oil.

4.  Install drain plug back in place.
5.  Remove front knuckle oil filler plug.
6.  Fill specified amount of oil into filler.
7.  Install filler plug back in place.

5321M-0508-040E

Filler Plug (on both sides)

Drain Plug (on both sides)

• Oil to Use: Page 43.
• Oil Capacity: Page 43.

NOTE

1.  Park machine on a level ground.
2.  Have an appropriate oil drain pan.
3.  Open seat bracket
4.  Remove center gearbox oil filler plug.

5321M-0508-050E

Drain Plug

NOTE

5. Remove center gearbox oil drain plug to

drain oil.

6.  Install drain plug back in place.
7.  Fill specified amount of oil into filler.
8.  Install filler plug back in place.

5321M-0508-140E

Filler Plug

Center Gearbox Oil (CMX222 Only)

• Oil to Use: Page 43.
• Oil Capacity: Page 43.

Содержание CM223































































































Результаты поиска

Содержание CM223

Отзывы:

CanyCom CM223, Руководство оператора, Страница: 67 / 94

Результаты поиска

Содержание CM223

Отзывы: