CanyCom CM223 Скачать руководство пользователя страница 49

Страница: 49 / 94

Maintenance

-40-

• Perform a pre-startup inspection (PSI) before each use, a monthly inspection once a

month, and a yearly inspection once a year.

• Some maintenance procedures described below may require special knowledge

or tools and instruments. Contact your CANYCOM representative to perform such
procedures.

Chassis

Item

Description

Schedule

Note

PSI

Mon

Year

Drive T

rain

Tires

Tires shall be inflated to the specified
pressure.

√ √ √

Page 56

Tires and wheels shall be free of crack,
damage, or uneven wear.

√ √

Wheel bolts shall not be loose or missing.

√ √ √

Wheel bearings do not exhibit excessive play
and no irregular noise or overheating shall
be observed.

√ √

Transmission

Irregular noise or overheating shall not be
observed when moving forward or backward.

√ √

There shall not be oil leaks in or around
transmission.

√ √

Auxiliary
Transmission

Transmission can be shifted to either position
positively and performs normally.

√ √

Lever shall not be loose or have excessive
play.

√ √

Front Diff. *1
Front Knuckle
*1 *2

Irregular noise or overheating shall not be
observed when traveling.

√ √

There shall not be oil leaks in or around front
differential case or knuckles.

√ √

Center
Gearbox*1

Transmission can be shifted to either 2WD
or AWD position positively and performs
normally.

√ √

Irregular noise or overheating shall not be
observed when traveling.

√ √

There shall not be oil leaks in or around
center gearbox.

√ √

*1 CMX222
*2 CM223

Содержание CM223































































































Результаты поиска

Содержание CM223

Отзывы:

CanyCom CM223, Руководство оператора, Страница: 49 / 94

Результаты поиска

Содержание CM223

Отзывы: