CanyCom CM141 Скачать руководство пользователя страница 22

Страница: 22 / 77

-13-

Operation

• Keep fire and spark away when handling fuel.

• Always stop engine before refueling.

• Do not fill beyond the limit (bottom of the filler filter) so that fuel will not

overflow. In case fuel is spilt, wipe out immediately.

Pre-start up Inspection

Preparation

Always perform an inspection before use.
Refer to the

Maintenance Schedule

(page 31) for the inspection schedule and procedure.

Checking and Filling Fuel

1.  Check fuel gauge. If fuel level is low, fill fuel.
2.  Open fuel filler cap and fill fuel.
3.  Put fuel filler cap back in place and close it

securely.

5331M-0401-010E

Fuel Gauge

Fuel Filler Cap

• Fuel : Automotive Unleaded Gasoline
• Fuel Tank Capacity : 7.0L

NOTE

• Always perform a pre-startup inspection. If machine needs repair, service it

before use.

• Fire hazard: clean machine of cut grass and similar materials. Cut grass that is

accumulated on the machine can catch fire.

Содержание CM141














































































Результаты поиска

Содержание CM141

Отзывы:

Бренды по названию

Популярные бренды

CanyCom CM141, Руководство оператора

Результаты поиска

Содержание CM141

Отзывы:

Бренды по названию

Популярные бренды