manualshive.com logo in svg

CanyCom BH42, Руководство оператора

Поделиться
Скачать
CanyCom BH42 Скачать руководство пользователя страница 59

-49-

Maintenance

5

 • Always keep the brake adjusted for maximum performance. Improperly adjusted 

brakes can result in property damage, serious injury, or death. 

5.7.4 Parking Brake

Spring

3592M-0507-070E

1.  Lift the vessel and support it with the safety 

prop.

2.  Move the drive clutch lever to the [Stop] 

position.

3.  Inspect that the amount of stretch on the 

brake spring is approximately 5 mm. If it is 
not, adjust.

4.  Undo the safety prop and lower the vessel.

Inspecting

1.  Lift the vessel and support it with the safety 

prop.

2.  Move the drive clutch lever to the [Stop] 

position.

3.  Loosen the lock nut.
4.  Adjust using the adjust nut on the handle 

lever  so  that  the  amount  of  stretch  is 
approximately 5 mm.

5.  Tighten the lock nut.
6.  Undo the safety prop and lower the vessel.

Lock Nut

Adjust Nut

3592M-0507-080E

Adjusting - on Handle Lever

Adjusting - on Brake

1.  Lift the vessel and support it with the safety 

prop.

2.  Move the drive clutch lever to the [Stop] 

position.

3.  Adjust  using  the  adjust  nut  so  that  the 

amount of stretch is approximately 5 mm.

4.  Undo the safety prop and lower the vessel.

Adjust Nut

Spring

3592M-0507-090E

Содержание BH42









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды