manualshive.com logo in svg

CanyCom BH42, Руководство оператора

Поделиться
Скачать
CanyCom BH42 Скачать руководство пользователя страница 4

About This Machine

 • This machine can kill you if the safety precautions in this manual and on the 

labels attached to this machine are not followed. Read and understand this 
manual and the safety labels on the machine thoroughly before using or 
servicing this machine. Always follow the instructions and safety precautions, 
or serious injury or death could result.

 • Do not modify this machine, or do not operate this machine with its safety 

covers removed or open. Serious injury or death could result. 

 • This machine shall only be used for its intended purpose: carrying grains, produce, dirt and 

similar materials. 

  - Do not carry other objects; doing so can damage the machine. 
  - Do not carry liquid concrete. Liquid concrete is corrosive and will damage the machine.
  - Do not use this machine for towing, pulling, pushing, lifting, or any such load-bearing use.

 • 

This machine is not intended to be used on public road or what is considered to be public 

road. It is the sole responsibility of the operator to consult the local regulations.

 • This machine is only intended to be used in the environment (temperature range and 

altitude) specified in 

3.1 Product Specifications

. 

 • This machine is a walk-behind machine. With the optional step, it can act as a stand-on 

machine.

  - In the stand-on configulation with the optional step, this machine has a riding capacity 

for one operor with maximum weight of 80kg only. Do not carry anyone other than the 
operator.

 • This machine is intended for, and meet the regulations and standards of the European 

Union. Use of this machine outside the Union can voilate the local regulations.

  - This machine is provided with the instructions for a specific countri in which it is sold. In 

case this machine is transfered to another country within the Union, it is the user’s sole 
responsibility to provide the necessary instructions for the destained country.

Intended Use of This Machine

Содержание BH42









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды