19
Mounting
The Monitor can be mounted onto the wall or stand.
If you intend to mount the monitor on the wall, we strongly recommend that you use wall mount
kits with attached M4*10mm screws and can load more than monitor weight, that you ensure it
is securely and safely installed.
CAUTION
:
When mounting the monitor, take care to tighten the retention screws or bolts until fully secure,
but do not over tighten. Over tightening the retention screws or bolts may cause them to become
stripped, rendering them useless.
Wall Mounting Installation
The Monitor has Video Electronics Standards Association (VESA) standard mounting holes
tapped into the rear panel. The standard holes are M4 set at 100 mm x 100 mm or 200mm x
100mm apart.
To mount the Monitor onto the wall or stand, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.(Listed VESA)
Step 2:
Carefully mark the locations of the four screw holes in the bracket on the wall
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into the four
pilot holes and tightening them.
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the four
screw holes on the real panel of the LCD Monitor and tighten until the screw shank is secured
against the rear panel.
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on the
bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor downwards
until the monitor rests securely in the slotted holes. Ensure that all four of the mounting screws
fit snuggly into their respective slotted holes.
Step 9:
Secure the LCD Monitor by fastening the retention screw of the wall-mounting bracket.
Step 10:
Secure the LCD Monitor by fastening the retention screw of the wall-mounting bracket.
100.0
200.0
100.0