36
37
CLEANING THE WHEELS AND SENSORS (1)
Wipe all the sensors and wheels with a soft dry rag or
similar.
CLEANING THE CHARGING STATION’S
TERMINALS (2)
Before cleaning, remove the charging station’s mains
adapter. Wipe the terminals with a soft dry rag or
similar.
CLEANING THE SUCTION OPENING AND
THE DUST SENSOR (3)
Wipe the surfaces with a soft dry rag or similar.
EASY-FIT MOP (4)
(Canvac Q Clean R250)
As shown in the figure, attach the self-adhering
easy-fit mop to the robot vacuum cleaner’s underside.
Replacing the mop when it is dirty is easy (mops are
available from your Canvac dealer).
NB! Guard the sensors from moisture and solvents – do
not wipe with anything wet!
REPLACING THE BATTERY (5)
a. Ensure that the robot vacuum cleaner is not
connected to the charger.
b. Put the robot vacuum cleaner’s power switch into
the OFF position.
c. Undo the 2 screws in the battery hatch (refer to
the figure).
d. Lift out the battery and undo the contact.
1.
2.
3.
4.
5.
Battery lid
5. Empty the dust holder.
