3
115
English
4
Use the "+" resp. the "–" key to select the desired channel number (see above).
5
Confirm and exit the menu item by pressing the Input-button " ".
Wireless Reset [WRE]
This functions allows you to delete all stored settings and paired Smart speaker and/or Smart subwoofer (slave speaker) connections of the
wireless audio module of the Connect 5.1 and in this way reset the wireless module.
Caution:
All settings and paired Smart speakers / Smart subwoofer that have been made according to the wireless audio module in the
Connect 5.1 will be deleted.
To perfom the reset please do as follows:
1
To enter the menu, press and hold the input select key " " for at least 3 seconds.
2
Use the "+" resp. the "–" key to select the menu item Wireless Setup [WIS] and confirm with the "Play/Pause" button " ".
3
Use the "+" resp. the "–" key to select the menu item Wireless Reset [WRE] and confirm with the "Play/Pause" button " ". The menu
shows "Reset", the display shows [YES].
4
To cancel the reset procedure, press the input select key " ". The menu goes back to the menu item Wireless Reset and the display
shows [WRE] again. Press the input select " " key additional two times to exit the menu.
5
To execute the reset press the Play/Pause button " ". The display then shows [YES] to confirm the reset procedure, the OSD shows
"Please Wait".
6
After the reset procedure, the Connect 5.1exits the menu and goes into normal mode.
5. Output Setup [OPS]
The fifth item of the Main menu is the Output Setup [OPS] which is used to set up both the speaker availability and speaker type, as well as
the way the speakers are connected to the Smart Connect 5.1 - wired or wireless. It contains the two items:
• Speaker Config
[SPC]
• Speaker Mapping
[SPM]
