3
109
English
Language [LAN]
With this option you can change the On-Screen menu (OSD) language from German to English and backwards.
To change the language please proceed as follows:
1
To enter the menu, press and hold the input select key " " for at least 3 seconds.
2
Use the "+" resp. the "–" key to select the menu item System Setup [SYS] and confirm with the "Play/Pause" button " ".
3
Use the "+" resp. the "–" key to select the menu item Language [LAN] and confirm with the "Play/Pause" button " ".
2
Use the "+" resp. the "–" key to select the desired volume.
3
Confirm and exit the menu item by pressing the Input-button " ".
Factory Reset [RES]
With this function you can reset the Smart Connect 5.1 to its factory settings. In case the Connect 5.1 has a mailfunction or does not connect
to a network anymore, please perform such a reset and repeat the installation process before you contact the customer support.
Caution:
ALL settings you have made including IR codes, the WiFi connection and paired mobile devices and speakers will be deleted.
To perform the reset using the touch keys on the top of the Connect 5.1 please proceed as follows:
1
Power up your Connect 5.1 using the Power" " " key.
2
To enter the menu, press the input select key " " until the display shows [SPS] and the Main Menu is entered.
3
Use the "+" or "-" key to navigate to the menu System Setup [SYS] and confirm with the Play/Pause button " ".
4
Select the function Factory Reset [RES] and confirm with the Play/Pause button " ". The display shows [YES], the OSD indicates "Reset
All".
5
To cancel the reset procedure, press the input select key " ". The display shows [RES] again. Press this key additional two times to exit
the menu.
6
To execute the reset, keep "Reset All" [YES] and confirm with the Play/Pause button " ". The display then shows [YES] to confirm the
reset procedure, the OSD shows "Please Wait".
7
After some seconds the Connect 5.1 reboots. During this procedure the display flashes [ON] and the LED flashes green fastly.