Canton DIGITAL MOVIE DM 90, Руководство пользователя

Страница: 64 / 68

64
Sound is too dull (not enough
treble)
Too much treble
Not enough top bass
Too much top bass
Too much bottom bass
Not enough / too much
volume in entire bass range
There is always a delay
between the image signal of
your flat screen and the audio
signal
1. You are producing a stereo signal in Virtual Surround
mode
2. Your room is heavily sound insulated
1. Your room has very little sound insulation
1. The polarity between the sub and satellites or among
the satellites is wrong
2. The „room comp.“ bass settings are too low
3. The sound gets obliterated in the transfer area because
of the different positions of the sub and satellites
1. The „room comp“ bass settings are too high
2. The subwoofer is very close to a wall or corner
1. The subwoofer is very close to a wall or corner
2. „Bass extension“ is set to medium
1. Incorrect volume settings for subwoofer
1. Flat screen signal processing takes longer than that of
the DM system
1. Change the play mode to stereo (p. 49)
2. Raise the treble level as described in „room comp
function treble“ (p. 53)
1. Raise the treble level as described in „room comp
function treble“ (p. 53)
1. Check and rectify polarity
2. Raise the bass level in the transfer area as
described in „room comp function bass“ (p. 53)
3. Raise the bass level in the transfer area as
described in „room comp function bass“ (p. 53)
1. Lower the bass level in the transfer area as
described in „room comp function bass“ (p. 53)
2. Reposition the sub farther away from the wall
1. Reposition the sub farther away from the wall
2. Set „bass extension“ to normal
1. Correct volume level settings
1. Set the necessary time delay using the „lip sync“
function