38
Registering the remote control with the DM
To register the remote control with the DM system follow the
following process:
1. Connect the DM to the power supply and switch it on at the mains.
Be careful to ensure that the system was previously switched off for
at least 20 seconds.
2. Within 30 seconds of switching on press the following buttons in
order
a.
b.
c.
A positive registration will be confirmed by a simultaneous double
flash of the left and right LEDs in the top row. If the registration has
failed the standby LED will flash twice. Correct the cause of the error
(device not switched on, distance too great etc.) and start the
process again.
a
b
c
X
DM70_Manual2008.pmd
09.10.2008, 12:04
38
