37
Deutsch
English
Preset
The
Preset
establishes in what mode your DM system will operate.
The display differentiates between function-specific and product-
specific characteristics.
Functions can be 2.1 Mode (factory setting) or 5.1 Mode. In the 5.1
Mode it is possible to operate active or wireless loudspeaker as rear
speakers via the
„2.1 MODE/5.1 MODE“
preamplifier output. The
mode „
5.1 DM 2“ and „5.1 flat“ should not be selected,
as this
setting requires an additional passive center speaker that cannot yet
be connected to the system. This does not apply to modes
„
5.1 DM 1“
, „
5.1 DM 90
“ and „
5.1 DM 70
“ as here the signals are
reproduced by both front speakers.
To alter the
Preset Mode
of the system press both the and the
buttons simultaneously for approx. 3 seconds then use the
buttons to change the
Preset
. To leave this mode press
any input button, press the button again or wait for 30 seconds
for the remote control to go into standby.
The product-specific characteristics are primarily related to your
DIGITAL MOVIE system. Select the suitable menu points for your
system.
DM70_Manual2008.pmd
09.10.2008, 12:04
37
