30
Using the DM system
Press to activate the DM system. The following lights will come on:
- one volume LED
- one playback mode LED
- one or two decoder mode LEDs
Press again to turn the DM system off.
The DM system will go into standby mode.
Main Menu
You can switch the inputs of the DM system directly using the buttons
„sat“, „dvd“, „tv“ and „aux“.
Use to select whether the sound reproduction should be in
stereo or surround mode. The selected mode will be displayed via the
three relevant LEDs.
st = Stereo, s1 = Surround1, s2 = Surround2
The system will set the relevant decoder mode automatically
according to the input signal.
Play mode „stereo“ will activate analogue stereo or PCM
Play modes „surround 1 and surround 2 / 2.1 Mode“: Virtual Dolby
Digital, Virtual Dolby Pro Logic II or Virtual DTS.
Play mode „surround 5.1 Mode“: Dolby Digital, Dolby Pro Logic II or
DTS.
Note: In order to accommodate the different recording philosophies
unique to music recordings we have implemented two surround
modes. Use „
surround 2
“ predominantly in the case of poor speech
intelligibility (for example, when the speech reproduction seems
unusually dull and unclear).
DM70_Manual2008.pmd
09.10.2008, 12:04
30
