Canton DIGITAL MOVIE DM 1, Руководство пользователя

Страница: 59 / 68

59
Deutsch
English
Repeat this process until all desired functions have been transferred.
Press to return to the previous menu.
If the transfer of the remote control data has failed, the message
„programming failed“ appears for approx. 5 sec. The previous menu
then appears and you can either repeat the programming or cancel
the process.
If the programming was successful, you will receive the message
„programming successful“.
Register the Remote Control
For the registration of the remote control to the DM system you
first need to follow the steps on page 58 (Programming the remote
control) The DM system parameters set at the factory cannot be
deleted, but they can be overwritten (reprogrammed) if necessary.
To do so, press after selecting the system. You will then be
informed that this device already exists and will be overwritten if
you continue (Device already exists – Overwrite?). Press „start“ to
confirm or to cancel. Once you have confirmed, you will be
asked to connect the DM system to be memorized to the mains
power supply and switch on the power switch. Please ensure that
the DM system was switched off for at least 20 sec. prior to this.
Press „start“ 5 - 10 sec. after switching on to initiate the connection
process or to cancel the process.
The remote control will now attempt to connect itself to the
subwoofer that has just been activated, „installation successful“
appears in the display if the connection was successful, and
„installation failed“ if it was not. Rectify the cause of the fault
(device not switched on, distance too great etc) and start the
process again. After a successful installation, use to choose
between a DM 1 and a DM 2 system. Confirm your choice with
.
If you own a second DM system, you can program it to this remote
control too via the „new device“ field. Once this field has been
selected and confirmed with , the process is identical to the one
described above.
Use the „clear key to delete functions which have already been
programmed. Once you have pressed the key, you will be asked
whether you really do want to delete the functions for this device.
Confirm by pressing ente or press esc“ to cancel. The remote
control then returns to the device selection menu. Exit the
programming mode by pressing „esc“.