Canton DIGITAL MOVIE DM 1, Руководство пользователя

Страница: 65 / 68

65
Deutsch
English
Remote control switches
automatically from IR to
operation mode
Infrared devices
(DVD,TV,SAT...) cannot be
selected
Device cannot be operated
No sound when recording
Recording too quiet
Recording distorted (over-
controlled)
Sound distorted in „zone 2“
Signal sounds distorted
1. Batteries low
1. Devices not (properly) memorized
1. Batteries low
2. Distance to device too great
3. Unable to memorize remote control code (original)
properly despite several attempts
4. Not all keys of the remote control have been
memorized
1. Output set to „zone 2“ and „zone vol“ set to min. or
very quiet
2. Signal to be recorded is Dolby Digital or DTS coded
1. Output set to „zone 2“ and „zone vol“ is set low
(standard 40)
1. Output set to „zone 2“ and „zone vol“ set too high
1. „zone vol“ too loud
1. Processor can over-regulate internally with multi-
channel recordings2. System volume set too high
1. Replace the batteries
1. Please (re)-program the Canton RC with the
code of the desired device (p. 58)
1. Replace the batteries, P.XX
2. Reduce the distance to the device
3. Because of the many different devices, it can
happen that the code of your device was not
memorized properly. Unfortunately, there is no
solution to this problem.
4. Please program the Canton RC with the code
of the desired device (p. 58)
1. When recording, set „output“ to „line out“
2. With Dolby Digital or DTS-coded signals,
always set „dynamic“ to „compressed“ (p. 54)
1. When recording, set „output“ to „line out“
(p. 53)
1. When recording, set „output“ to „line out“
(p. 53)
1. Lower the volume for „zone vol“
1. Set „dynamic“ to „compressed (p. 52)
2. Lower the volume