Cantiere Del Pardo Grand Soleil 46.3', Руководство пользователя

Страница: 85 / 98

Water System
Grand Soleil 46.3'
27.
2
Tank inspection
◊
The inspection ports, one for each tank, are placed on the top of the
tanks and they are made of a rubber gasket held firmly in place by
a hose clamp.
◊
Although the tanks are built following the highest hygiene stand-
ards, they should be thoroughly cleaned and disinfected at least
once a year.
Filling instructions
• While filling the tanks:
- avoid excessive water pressure.
- we suggest leaving the two valves of the selector E between the
tanks always in the close position.
Pressure water system
◊
Fresh water reaches the tanks directly from the water intake on
deck or from the water maker (Opt).
• From the fore and aft water tanks, the water gets to the to the two
valves placed on the selector
E
(§ page
27
.6) located under the
central sit of the saloon.
• Then water goes through the filter
F
, to the water pump
G
and from
there to the water gun barrel
H
(§ page
27
.6).
• From here the water is fed through the cold water manifold
A
(§
page
27
.7) to the four cold water outlets on the yacht (shower and
sink in the fore head and the aft head, galley sink and on deck
shower) and to the water heater.
• Hot water from the heater § page
26
.1) reaches the hot water
manifold
B
located under the floor boards of the saloon and from
there goes to the four hot water outlets on the yacht listed above
(§ pages
27
.6 and
27
.7).
◊
A foot pump (opt) to provide water to the galley sink may be
connected directly to an extra valve placed on the cold water line
between the filter and the water pump (§ page
27
.6).
Shutting clip
Shutting membrane